Product manual available for download at any time
Please leave your information below for more product information
I read carefully and accept the attached Privacy Agreement

EXCAVATOR

SE75
OVERALL WEIGHT
7650kg
BUCKET CAPACITY
0.25~0.35(0.32)m³
ENGINE POWER
With 48.9kW/2000rpm, this engine conforms to China-III emission regulation.
SE75
  • Characteristics
  • parameters
  • cases
  • recommendations
characteristic
  • All-round champion
  • High-end system configuration
  • Enhanced working device
  • Drive sprockets, idlers, track rollers, carrier rollers, and tracks
  • Intelligent electronic control and optimal power control
  • Spacious and comfortable operating environment
  • All-ground maintenances
  • Optional equipment of machine
  • Optional attachments
  • All-round champion

    The SE75-9 hydraulic excavator features all-new body design and high beauty and elegance. The high-efficiency environmental-friendly engine is installed and the power system and the hydraulic system are highly matched to realize powerful performance and smooth operations of machine, with the maximum bucket breakout force at 66N and the maximum bucket arm breakout force at 44N.

  • High-end system configuration

    The SE75-9 hydraulic excavator features all-new body design and high beauty and elegance. The high-efficiency environmental-friendly engine is installed and the power system and the hydraulic system are highly matched to realize powerful performance and smooth operations of machine, with the maximum bucket breakout force at 66N and the maximum bucket arm breakout force at 44N.

  • Enhanced working device

    The design of structural parts is comprehensive optimized and the critical load-carrying locations are reinforced to resist against severe working conditions.

    The baseplates, side plates, and reinforcement plates of bucket are made of high-strength wear-resistant material to improve the durability of bucket.

    The enhanced working device adapts to diversified severe working conditions.

  • Drive sprockets, idlers, track rollers, carrier rollers, and tracks

    The design of structural parts is comprehensive optimized and the critical load-carrying locations are reinforced to resist against severe working conditions.

    The baseplates, side plates, and reinforcement plates of bucket are made of high-strength wear-resistant material to improve the durability of bucket.

    The enhanced working device adapts to diversified severe working conditions.

     

  • Intelligent electronic control and optimal power control

    The intelligent control system realizes the optimal match between power system and hydraulic system to improve the working efficiency and reduce the fuel consumption.

    The man-machine friendly new generation intelligent electronic control system enables you to master all working status of your machine.

    Four preset working modes of P (Heavy-Load), E (Economic), A (Automatic), and B (Breaking Hammer) feature easy switchover.

  • Spacious and comfortable operating environment

    The colors of the all-injection-molded interior trim parts are effectively matched as per ergonomics to mitigate the operator’s visual fatigue.

    The control devices are reasonably arranged to realize large space, broad vision, and convenient and comfortable operations.

    The high-power A/C system and the air cushioned seat guarantee comfortable driving/riding.

  • All-ground maintenances

    The electric parts are centrally arranged to ease the checking and maintenances.

    The filling of washing fluid, the replacement of air filter element, and the power master switch are easily accessible.

    The fully openable engine hood is installed with locating mechanism to realize handy and safe opening, large engine compartment space, and easy maintenances.

    The diesel strainer is installed remotely on the right door to make the maintenance easier.

    The parallel radiator effectively avoids the overheating and eases the cleaning.

  • Optional equipment of machine

    Refueling pump

    Cab warning lamp

    Cab ceiling lamp

    Cab overhead protective net

    Cab front upper protective net

    Cab front lower protective net

    Rubber track

    Narrow bucket

  • Optional attachments

    Crusher, ripper, timber grab, stone grab, hydraulic tamper, quick change coupling, and breaking hammer pipeline.

parameter
Comparative item SE75(Standard version)
Overall dimensions
Overall length (mm) 6240
Ground length (During transport) (mm) 3750
Overall height (To the top of boom) (mm) 2660
Overall width (mm) 2260
Overall height (To top of cab) (mm) 2680
Ground clearance of counterweight (mm) 825
Minimum ground clearance (mm) 385
Tail turning radius (mm) 1880
Track length (mm) 2820
Track gauge (mm) 1800
Track width (mm) 2250
Standard track shoe width (mm) 450
Turntable width (mm) 2230
Distance from slewing center to tail (mm) 1850
Working range
Maximum digging height (mm) 6945
Maximum dumping height (mm) 4895
Maximum digging depth (mm) 4120
Maximum vertical digging depth (mm) 3620
Maximum digging distance (mm) 6360
Maximum digging distance at ground level (mm) 6205
Working device minimum turning radius (mm) 2040
Maximum lifting height of bulldozer blade (mm) 385
Maximum digging depth of bulldozer blade (mm) 225
Engine
Model V3307T (China III)
Type Water-cooled and turbocharged
Displacement (L) 3.3
Rated power (kW/rpm) 48.9/2000
Hydraulic system
Type of hydraulic pump Axial variable plunger pump
Rated working flow (L/min) 160
Bucket
Bucket capacity (m³) 0.25~0.35(0.32)
Swing system
Maximum swing speed (r/min) 11
Brake type Mechanically applied and pressure released
Digging force
Bucket arm digging force (KN) 44
Bucket digging force (KN) 66
Operating weight and ground pressure
Operating weight (kg) 7650
Ground pressure (kPa) 34
Traveling system
Traveling motor Axial variable displacement plunger motor
Traveling speed (km/h) 2.9/4.8
Traction force (KN) 86.5
Gradeability 70%(35°)
Tank capacity
Fuel tank capacity (L) 155
Cooling system (L) 11
Engine oil capacity (L) 11
recommend
  • SE650LC
    SE650
    Engine power: (Metric):
    377kW/1800 (China III)
    Overall weight (Metric):
    64500kg
    Type (horsepower):
    SE650
  • EXCAVATOR SE135
    SE135
    OVERALL WEIGHT:
    13500kg
    BUCKET CAPACITY:
    0.4~0.65(0.55)m
    ENGINE POWER:
    With 86kW/2200rpm , this engine conforms to China-III emission regulation.
  • SW150
    L76
    Engine Power: (Metric):
    129kW/2200 (China III)
    Overall Weight (Metric):
    13500kg
    Bucket capacity:
    0.45~0.7(0.58)m³
  • EXCAVATOR SE150
    SE150
    OVERALL WEIGHT:
    13500kg
    BUCKET CAPACITY:
    0.4~0.65(0.55)m
    ENGINE POWER:
    With 86kW/2200rpm , this engine conforms to China-III emission regulation.
  • EXCAVATOR SE17SR
    SE17SR
    OVERALL WEIGHT:
    1800kg
    BUCKET CAPACITY:
    0.04m³
    ENGINE POWER:
    11.8kW, this engine conforms to Euro V/EPA Tier 4F emission regulation.
  • SE18SR
    SE18
    Engine power: (Metric):
    With 11.8KW/2300rpm, this engine conforms to Euro V/EPA Tier 4F emission regulation.
    Overall weight (Metric):
    1940kg
    Bucket capacity:
    0.04m³